TQ R/C & Hobbies

Tamiya R/C System Series No.45

EXPEC GT-I 2.4G RADIO CONTROL SYSTEM (BASIC SET)

Item No：45045

【 No Frequency Crystals Required 】 This 3-channel radio control system utilizes a 2.4GHz frequency hopping system which eliminates the need for frequency crystals. Designed by world-famous German industrial designer Hans A. Muth, the wheel/trigger type transmitter has a distinctive, ergonomic form.　The ideally placed steering wheel and trigger offer a user-friendly layout. This set does not include an ESC to allow you to use your desired ESC. Only four R6/AA/UM3 batteries (sold separately) are required for the transmitter, making it lighter and more energy efficient.
＜NOTE＞ESCs without BEC such as TEU-101BK and TEU-104BK are not compatible with the receiver.

【 Easy to Use Layout 】 The ideally placed steering wheel and trigger, centrally located servo reverse switch and throttle/steering trim dials; and convenient power switch, 3-channel button, and Throttle ATV/Steering Dual Rate trim dial positions combine to offer a user-friendly layout. Transmitter and receiver are factory paired and no setup is required.

【 Specifications 】 ●Transmitter: TRU-07, Frequency Range: 2.4GHz, Power Supply: 6V (R6/AA/UM3 Battery x4), Current Consumption: Less than 100mA, Antenna: Built-In　●Receiver: TRU-07, Frequency Range: 2.4GHz, Power Supply: 4.8～6V, Dimensions: 26×39×10mm (excluding protrusions), Weight: 8g　●Servo: TP-S3003 Power Supply: 4.8～6V (share with receiver), Current Consumption: 8mA (using 6V battery), Output Torque: 4.1kg-cm (using 6V battery), Operating Speed: 0.19sec/60° (using 6V battery), Dimensions: 40.4×19.8×36mm, Weight: 37.2g

【 About Hans A. Muth 】 A German industrial designer. After working at Ford of Europe and BMW as an automotive stylist, he became a freelance designer and gained attention for his design of the Suzuki Katana motorcycle in the 1980s. He was involved with product development projects as a design consultant for numerous companies around the world. His work has covered a wide variety of fields ranging from automotive and aerospace design to consumer electronics.

Specifications are subject to change without notice.

Tamiya R/C System Series No.46

EXPEC GT-I 2.4G RADIO CONTROL SYSTEM (BASIC SET + ESC)

Item No：45046

【 No Frequency Crystals Required 】 This 3-channel radio control system utilizes a 2.4GHz frequency hopping system which eliminates the need for frequency crystals. Designed by world-famous German industrial designer Hans A. Muth, the wheel/trigger type transmitter has a distinctive, ergonomic form.　The ideally placed steering wheel and trigger offer a user-friendly layout. This set includes a TEU-302BK ESC. Only four R6/AA/UM3 batteries (sold separately) are required for the transmitter, making it lighter and more energy efficient.

【 Easy to Use Layout 】 The ideally placed steering wheel and trigger, centrally located servo reverse switch and throttle/steering trim dials; and convenient power switch, 3-channel button, and Throttle ATV/Steering Dual Rate trim dial positions combine to offer a user-friendly layout. Transmitter and receiver are factory paired and no setup is required.

【 Specifications 】 ●Transmitter: TRU-07, Frequency Range: 2.4GHz, Power Supply: 6V (R6/AA/UM3 Battery x4), Current Consumption: Less than 100mA, Antenna: Built-In　●Receiver: TRU-07, Frequency Range: 2.4GHz, Power Supply: 4.8～6V, Dimensions: 26×39×10mm (excluding protrusions), Weight: 8g　●Servo: TP-S3003 Power Supply: 4.8～6V (share with receiver), Current Consumption: 8mA (using 6V battery), Output Torque: 4.1kg-cm (using 6V battery), Operating Speed: 0.19sec/60° (using 6V battery), Dimensions: 40.4×19.8×36mm, Weight: 37.2g　●ESC: TEU-302KB　Control System: High Frequency Wave Drive System, Max. Continuous Current (FET Spec): Forward 120A, Reverse 60A, Power Supply: 7.2～8.4V, Compatible Motor: Electric Motor for R/C cars (over 23 turns), Drive Frequency: 500Hz, 1kHz, 2kHz (with 3 steps), Output Voltage for Receiver： 6V (Input 7.2V), Dimensions: 33.5×27.2×14.3mm (excluding protrusions), Weight: 48g (body 43g)

【 About Hans A. Muth 】 A German industrial designer. After working at Ford of Europe and BMW as an automotive stylist, he became a freelance designer and gained attention for his design of the Suzuki Katana motorcycle in the 1980s. He was involved with product development projects as a design consultant for numerous companies around the world. His work has covered a wide variety of fields ranging from automotive and aerospace design to consumer electronics.

Specifications are subject to change without notice.

【 New Item 】

Display Goods

Display Turntable (Black)

Item No：89927

★This black colored Turntable allows you to leisurely view your finished model from various angles. ★The set includes mirror type and brick-wall patterned table sheets. High and Low selectable turntable speed. ★Table diameter: 20cm.

Specifications are subject to change without notice.

【 New Item 】

Finishing Material Series No.125

15 Well Palette (5pcs.)

Item No：87125

These Palettes are made of PET plastic and each palette contains 15 wells, including 9 round (Dia: 25mm/Depth: 9mm) and 6 five-sided (Depth: 9mm) sections. The palette is 0.3mm thick and each section can be easily cut away with scissors and be disposed of after each use.

Specifications are subject to change without notice.

【 New Item 】

Masterwork Collection

1/48 Mitsubishi A6M3a Zero Fighter 582nd Naval Air Group (Finished Model)

Item No：21093

★This is a 1/48 scale finished display model of the Mitsubishi A6M3a Zero Fighter from 582nd Naval Air Group. ★Markings depict the aircraft piloted by major Saburo Shindo. ★Metal gun barrels and photo-etched landing gear position indicators included. ★1 seated pilot figure included.

Information and specifications coming soon.

【 New Item 】

Masterwork Collection

1/48 Mitsubishi A6M3 Zero Fighter Iwakuni Naval Air Group (Finished Model)

Item No：21092

★This is a 1/48 scale finished display model of the Mitsubishi A6M3 Zero Fighter from Iwakuni Naval Air Group. ★Photo-etched parts depict landing gear position indicators included. ★Weathering is applied to achieve realistic finish. ★1 seated pilot figure included.

Information and specifications coming soon.

【 New Item 】

1/35 Military Miniature Series No.313

U.S. Light Tank M5A1 "Pursuit Operation" Set (w/4 Figures)

Item No：35313

★1/35 scale plastic assembly kit of the U.S. Light Tank M5A1 with 4 figures. ★4 figures and 2 types of markings included.

Information and specifications coming soon.

【 New Item 】

1/35 Military Miniature Series No.312

U.S. Howitzer Motor Carriage M8 "Awaiting Orders" Set (w/3 Figures)

Item No：35312

★1/35 scale plastic assembly kit of the U.S. Howitzer Motor Carriage M8 with 3 figures. ★Open top turret, howitzer, and overall form reproduced in rich detail. ★Commander, gunner, and loader figures included.

Information and specifications coming soon.

【 New Item 】

1/35 R/C Tank Battle System Series No.4

U.S. M4A3 Sherman (w/2.4GHz Control Unit)

Item No：48212

★New addition to the 1/35 R/C Tank Battle System Series is the U.S. M4A3 Sherman. ★Forward/reverse running, left/right turning, turret rotation, main gun elevation/depression are all controllable. Sounds such as engine, main gun firing and explosions also reproduced. ★LED indicator flashes or changes color to show tank's status during battle. ★2.4GHz system eliminates the need for frequency crystals. ★Requires four R03/AAA/UM4 batteries for tank model and one 006P 9V battery for transmitter (sold separately).

Information and specifications coming soon.

【 New Item 】

1/35 R/C Tank Battle System Series No.3

German Panzerkampfwagen IV Ausf.J (w/2.4GHz Control Unit)

Item No：48211

★New addition to the 1/35 R/C Tank Battle System Series is the German Panzerkampfwagen IV Ausf.J. ★Forward/reverse running, left/right turning, turret rotation, main gun elevation/depression are all controllable. Sounds such as engine, main gun firing and explosions also reproduced. ★LED indicator flashes or changes color to show tank's status during battle. ★2.4GHz system eliminates the need for frequency crystals. ★Requires four R03/AAA/UM4 batteries for tank model and one 006P 9V battery for transmitter (sold separately).

Information and specifications coming soon.